Banquet Table and Chair Setup: How to Match Chairs to Folding Tables
A good banquet table and chair setup comes down to fit. Guests notice when knees catch the table frame or elbows touch all through the main course. Staff notice at pack-down, when everything has to go back to the store.
This guide covers matching chairs to folding tables in function rooms, conference venues, school halls and marae: chairs per table size, table and seat heights, chair widths, and trolleys for both. For gaps between tables and aisle widths, use our folding tables event spacing guide. If you haven't settled on a table shape yet, start with round vs rectangular folding tables.
How many chairs per banquet table
The seating figures on our product pages give a working range. Use the lower number for a long plated dinner and the higher number for shorter sittings.
Rectangular tables
- 1800 mm tables: the HD folding trestle table 1800 × 750, the HDM fold-down table 1800 × 750 and the SCW wooden folding table 1800 × 750 each seat 6 to 8. So does the SM fold-up table 1800 × 800.
- 2400 mm tables: the HD 2400 × 750 seats 8 to 10.
Round tables
- 1500 mm rounds: the HDRB 1500 seats 8.
- 1800 mm rounds: the HDRB 1800 and HDMR 1800 seat 10, and the SMR 1800 seats 9.
Matching seat height to table height
Our folding tables sit in a narrow height band:
- BM plastic folding tables: 740 mm for the 1800 × 760 and the 1500 and 1800 mm rounds, and 745 mm for the 2428 × 760
- SM and SMR: 741 mm
- HD, HDRB and SCW: 750 mm
- HDM and HDMR: 760 mm
Seat heights on stackable chairs vary just as little. The Stax Chair has a 440 mm seat, the Game Skid Upholstered Seat & Back Chair 460 mm, the Klub Chair and Zip Chair 470 mm, and the Dallas PVC Chair and Maxim chair 480 mm.
So the gap between seat and tabletop runs from about 260 mm (a 480 mm seat at a 740 mm BM table) to 320 mm (a 440 mm seat at a 760 mm HDM table). A smaller gap leaves less thigh room, and a larger one puts the plate a little higher.
HDM tables have a full steel sub-frame and SM tables have strengthening rails under the top, so test one table with your chosen chair for knee room before ordering a full set.
Chair width and how many fit along a table
The seating range assumes chairs that suit the table. A quick check is to divide the table length by the chair's overall width.
- The Maxim chair is 480 mm wide overall and the Dallas PVC Chair 500 mm. Three fit along each side of an 1800 mm table with room to spare, and four fit along a 2400 mm side.
- The Zip Chair is 570 mm wide overall. Four along a 2400 mm side take up 2280 mm, which is tight once guests start using cutlery.
- Eight guests at an 1800 mm table would mean four per side, or 450 mm of length per chair. That is narrower than any of the chairs above, so eight usually means three per side plus one at each end.
An 1800 mm round is about 5.65 m around, so 10 guests get roughly 565 mm each. A 1500 mm round is about 4.7 m around, giving 8 guests roughly 590 mm each. So a round can often take a wider chair than a rectangle seating the same number. For which chair suits which function, see stacking chairs for hospitality venues.
Moving tables and chairs on trolleys
Tables and chairs each need the right trolley, and the numbers rarely line up one to one. Table trolleys have to match the table. All of these are in our folding trestle table trolleys range:
- The BM Folding Table Trolley holds up to 20 BM tables in the 1800 and 2400 mm lengths, and at 770 mm wide it fits through standard doorways. The BM Round Folding Table Trolley holds up to 12 BM rounds. BM trolleys fit BM tables only.
- Other rectangular tables go on the New Zealand made Light Duty trolley (up to 10) or Heavy Duty trolley (up to 20).
- Other rounds go on the New Zealand made 15R or 18R trolley, which hold up to 8 each.
The New Zealand made trolleys are made to order, with a lead time of about 12 to 15 working days, and are designed for indoor use.
Chair trolleys are often made for one model. The Stax trolley takes up to 30 Stax Chairs and the Maxim trolley up to 25 Maxims. The Zip Chair stacks 20 high on a trolley, and the Dallas PVC Chair stacks up to 40 high. For mixed chairs, the imported Event Stacking Chair Trolley and the New Zealand made Stacking Chair Trolley suit most stacking chairs.
Here's how that works for a room of 12 HDRB 1800 rounds seating 120. The tables fit on two 18R trolleys. On the Game Skid Chair Trolley, non-upholstered Game Skid chairs stack 30 high, so 120 chairs need four trolleys. The upholstered version stacks 15 high, so the same 120 need eight. Padded chairs can double your chair trolleys and their storage space.
For more on loading and storage, see how to move and store folding tables for events and our guide to stackable chair trolleys.
Putting the setup together
Settle table shape and spacing first. Then set chairs per table, check the seat-to-tabletop gap and chair widths, and count trolleys for both.
When you're ready, you can browse the folding tables and stackable chairs ranges and add the sizes you need to a quote. Freight is quoted to your address.